![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SOFT-CASE | |||||||||||
![]() |
![]() |
![]() |
![]() |
||||||||
Part #
Off-white |
Part # Lava Gray |
Part # Infra-Red |
Type / Battery Compartment |
Dimensions in mm |
Drawings |
||||||
L |
W |
H |
|||||||||
| SOFT-CASE S - No Batt Comp't | 51 |
83 |
14 |
|
|
||||||
| SOFT-CASE M - No Batt Comp't | 65 |
105 |
19 |
|
|||||||
| SOFT-CASE M - 2 x AAA cells* | 65 |
105 |
19 |
|
|||||||
| SOFT-CASE L - No Batt Comp't | 73 |
116 |
24 |
|
|||||||
| SOFT-CASE L - 2 x AA cells* | 73 |
116 |
24 |
|
|||||||
| SOFT-CASE L - 1 x 9V cell* | 73 |
116 |
24 |
|
|||||||
| SOFT-CASE XL - No Batt. Comp't | 92 |
150 |
28 |
|
|||||||
| SOFT-CASE XL - 4 x AA cells* | 92 |
150 |
28 |
|
|||||||
| Notes: * For cases with battery compartments, order battery contacts separately |
|||||||||||
| INTERMEDIATE RINGS | ||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||||
| For Type.. | Part # ABS Off-white* |
Part # ABS Lava Gray* |
Part # PMMA Infra-Red* |
Part # ABS Chromated* |
Part # Protection Ring IP 54 - TPE* |
|||||
| S | ||||||||||
| M | ||||||||||
| L | ||||||||||
| XL | ||||||||||
| Notes: * Intermediate rings increase case height by 3 mm for S, M & L , and 5 mm for XL * Chromated - modern matt chrome finish * TPE ring also provides bump protection and IP 54 sealing |
||||||||||
| BATTERY CONTACTS | ||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
||||
| For.. | Part # Battery Contacts Kit 2 x 1.5 V AAA |
Part # Battery Contacts Kit 2 x 1.5 V AA |
Part # Battery Contacts Kit 1 x 9V |
Part # Battery Contacts Kit 4 x 1.5 V AA |
||||
| M - with battery compartment | ||||||||
| L - with battery compartment | ||||||||
| XL - with battery compartment | ||||||||
| ACCESSORIES | ||||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||||||
| For Type..
|
Part # Combi-Clip (Belt Clip & Wall Clip) Off-White* |
Part # Combi-Clip (Belt Clip & Wall Clip) Lava Gray* |
Part # Combi-Clip (Belt Clip & Wall Clip) Black* |
Part # Tilt Foot Bar Off-White* |
Part # Tilt Foot Bar Lava Gray* |
Part # Tilt Foot Bar Black |
Part # Adapter for 4-K In-Vehicle Holding System* |
|||||||
| ALL | ||||||||||||||
| Notes: * Combi-Clip - Can be used as a Belt Clip and a Wall Clip. Requires two Ø 4.2 mm holes drilled in the base. Allows vertical orientation of S, M & L, and horizontal orientation of M & L * Tilt Foot Bar - Requires two Ø 4.2 mm holes drilled in the base - pre-molded drilling centres provided 4-K In-Vehicle Holding System * In-vehicle adapter - Self-adhesive pad fits to case. Adapter mounts to in-vehicle and bike holders see 4-K ordering information |
||||||||||||||
| CARRYING ACCESSORIES | ||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
||||
| For size.. | Part # Ring Eyelet Ø 2.5 mm* |
Part # Ring Eyelet Ø 4.0 mm* |
Part # Hand Strap 'Woven'* |
Part # Neck Strap 'Reflex'* |
||||
| S, M & L | ||||||||
| XL | ||||||||
| Notes: * Ring Eyelet Ø 2.5 mm - volcano plastic, inside ring diameter 2.5 mm - drill Ø 4 mm hole in case - (for use with hand & neck straps) * Ring Eyelet Ø 4 mm - volcano plastic, inside ring diameter 4 mm - drill Ø 5 mm hole in case - (for use with hand & neck straps) * Hand Strap 'Woven' - grey with quick action lock, approx 200mm long (for use with Ring Eyelet) * Neck Strap 'Reflex' - silver/black with quick-action lock, approx. 860mm long (for use with Ring Eyelet) |
||||||||
|
||||||||||||||||||||||
Last Updated:
18-Nov-2011
©OKW Enclosures, Inc. USA. All rights reserved. |
||||||||||||||||||||||