Advanced Search Part-No.
Login / Registration Your location/language Canada, English
A9160003 Plug-in contact, 1 x 9 V

A9160003

Plug-in contact, 1 x 9 V

Version: Lateral cable exit. Cable length approx. 3.937". Diameter of contacts = 0.224"/0.209".
Application: for a 9 V flat battery.

Supply

1 plug-in contact

  • To be used for
A0615117 COMTEC 150 H, Vers. II

A0615117

COMTEC 150 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

Close

A0615117

COMTEC 150 H, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.81″
IP 40
A0615119 COMTEC 150 H, Vers. II

A0615119

COMTEC 150 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

Close

A0615119

COMTEC 150 H, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.81″
IP 40
A0620117 COMTEC 200 H, Vers. II

A0620117

COMTEC 200 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

Close

A0620117

COMTEC 200 H, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.87″x5.91″x2.47″
IP 40
A0620119 COMTEC 200 H, Vers. II

A0620119

COMTEC 200 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

Close

A0620119

COMTEC 200 H, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.87″x5.91″x2.47″
IP 40
A9046107 HAND-TERMINAL M, Vers. I

A9046107

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Close

A9046107

HAND-TERMINAL M, Vers. I
product added to your basket
PC+ABS (UL 94 V-0)
off-white RAL 9002
8.66″x4.72″x2.56″
IP 65 opt.
A9046109 HAND-TERMINAL M, Vers. I

A9046109

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Close

A9046109

HAND-TERMINAL M, Vers. I
product added to your basket
PC+ABS (UL 94 V-0)
black RAL 9005
8.66″x4.72″x2.56″
IP 65 opt.
A9046207 HAND-TERMINAL M, Vers. II

A9046207

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminum-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Close

A9046207

HAND-TERMINAL M, Vers. II
product added to your basket
PC+ABS (UL 94 V-0)
off-white RAL 9002
8.66″x4.72″x2.56″
IP 65 opt.
A9046209 HAND-TERMINAL M, Vers. II

A9046209

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminum-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Close

A9046209

HAND-TERMINAL M, Vers. II
product added to your basket
PC+ABS (UL 94 V-0)
black RAL 9005
8.66″x4.72″x2.56″
IP 65 opt.
A9060007 HAND-HELD-BOX P, Vers. I

A9060007

HAND-HELD-BOX P, Vers. I Design: Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version With lateral recess for rocker switch

Supply Top and base part, battery compartment lid, assembly kit

Close

A9060007

HAND-HELD-BOX P, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.44″
A9060009 HAND-HELD-BOX P, Vers. I

A9060009

HAND-HELD-BOX P, Vers. I Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version With lateral recess for rocker switch

Supply Top and base part, battery compartment lid, assembly kit

Close

A9060009

HAND-HELD-BOX P, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.44″
A9060017 HAND-HELD-BOX P, Vers. II

A9060017

HAND-HELD-BOX P, Vers. II Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version Without lateral recess

Supply Top and base part, battery compartment lid, assembly kit

Close

A9060017

HAND-HELD-BOX P, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.44″
A9060019 HAND-HELD-BOX P, Vers. II

A9060019

HAND-HELD-BOX P, Vers. II Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version Without lateral recess

Supply Top and base part, battery compartment lid, assembly kit

Close

A9060019

HAND-HELD-BOX P, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.44″
A9061017 HAND-HELD-BOX N, Vers. I

A9061017

HAND-HELD-BOX N, Vers. I Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version With battery compartment

Supply Top and base part, battery compartment lid, assembly kit

Close

A9061017

HAND-HELD-BOX N, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.09″x3.94″x1.73″
A9061019 HAND-HELD-BOX N, Vers. I

A9061019

HAND-HELD-BOX N, Vers. I Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version With battery compartment

Supply Top and base part, battery compartment lid, assembly kit

Close

A9061019

HAND-HELD-BOX N, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.09″x3.94″x1.73″
A9062017 HAND-HELD-BOX M, Vers. I

A9062017

HAND-HELD-BOX M, Vers. I Small hand-held case with excellent design. With recessed area, e.g. for membrane keyboards, control elements. Cut-out section for digital and analogical modules. Battery compartment accessible from the outside with locked battery compartment lid. Raised front area to accommodate plugs.

Version With battery compartment for 9 V flat batteries or 1.5 V baby cells (C) with contacts for soldering

Supply Top and base part, battery compartment lid, assembly kit

Close

A9062017

HAND-HELD-BOX M, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.52″
A9062019 HAND-HELD-BOX M, Vers. I

A9062019

HAND-HELD-BOX M, Vers. I Small hand-held case with excellent design. With recessed area, e.g. for membrane keyboards, control elements. Cut-out section for digital and analogical modules. Battery compartment accessible from the outside with locked battery compartment lid. Raised front area to accommodate plugs.

Version With battery compartment for 9 V flat batteries or 1.5 V baby cells (C)

Supply Top and base part, battery compartment lid, assembly kit

Close

A9062019

HAND-HELD-BOX M, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.52″
A9067107 SMART-CASE L, Vers. I

A9067107

SMART-CASE L, Vers. I Large, ergonomic handheld enclosure. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version With battery compartment for two 1.5 V mignon cells (AA)or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9067107

SMART-CASE L, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 40
A9067109 SMART-CASE L, Vers. I

A9067109

SMART-CASE L, Vers. I Large, ergonomic handheld enclosure. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9067109

SMART-CASE L, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.51″x2.47″x1.20″
IP 40
A9067209 SMART-CASE L, Vers. I

A9067209

SMART-CASE L, Vers. I Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part. Polished front area for utmost effectiveness when exposed to infra-red light.

Version With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9067209

SMART-CASE L, Vers. I
product added to your basket
PMMA (IR) (UL 94 HB)
black RAL 9005
5.51″x2.47″x1.20″
IP 40
A9068107 SMART-CASE XL, Vers. I

A9068107

SMART-CASE XL, Vers. I Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9068107

SMART-CASE XL, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
6.61″x2.93″x1.39″
IP 40
A9068109 SMART-CASE XL, Vers. I

A9068109

SMART-CASE XL, Vers. I Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9068109

SMART-CASE XL, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
6.61″x2.93″x1.39″
IP 40
A9068209 SMART-CASE XL, Vers. I

A9068209

SMART-CASE XL, Vers. I Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part. Polished front area for utmost effectiveness when exposed to infra-red light.

Version With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9068209

SMART-CASE XL, Vers. I
product added to your basket
PMMA (IR) (UL 94 HB)
black RAL 9005
6.61″x2.93″x1.39″
IP 40
A9072107 DATEC-POCKET-BOX L

A9072107

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072107

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 41
A9072109 DATEC-POCKET-BOX L

A9072109

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072109

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41
A9072117 DATEC-POCKET-BOX L

A9072117

DATEC-POCKET-BOX L Robust pocket box with sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072117

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 54
A9072119 DATEC-POCKET-BOX L

A9072119

DATEC-POCKET-BOX L Robust pocket box wit sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072119

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 54
A9072127 DATEC-POCKET-BOX L

A9072127

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072127

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 41
A9072129 DATEC-POCKET-BOX L

A9072129

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072129

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41
A9072209 DATEC-POCKET-BOX L

A9072209

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072209

DATEC-POCKET-BOX L
product added to your basket
PMMA (IR) (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41
A9072219 DATEC-POCKET-BOX L

A9072219

DATEC-POCKET-BOX L Robust pocket box with sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072219

DATEC-POCKET-BOX L
product added to your basket
ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 54
A9072229 DATEC-POCKET-BOX L

A9072229

DATEC-POCKET-BOX L Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9072229

DATEC-POCKET-BOX L
product added to your basket
PMMA (IR) (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41
A9073107 DATEC-MOBIL-BOX S, Vers. I

A9073107

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073107

DATEC-MOBIL-BOX S, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.
A9073109 DATEC-MOBIL-BOX S, Vers. I

A9073109

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073109

DATEC-MOBIL-BOX S, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.
A9073207 DATEC-MOBIL-BOX S, Vers. II

A9073207

DATEC-MOBIL-BOX S, Vers. II Design: Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073207

DATEC-MOBIL-BOX S, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.
A9073209 DATEC-MOBIL-BOX S, Vers. II

A9073209

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073209

DATEC-MOBIL-BOX S, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.
A9073307 DATEC-MOBIL-BOX S, Vers. III

A9073307

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073307

DATEC-MOBIL-BOX S, Vers. III
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.
A9073309 DATEC-MOBIL-BOX S, Vers. III

A9073309

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073309

DATEC-MOBIL-BOX S, Vers. III
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.
A9073407 DATEC-MOBIL-BOX S, Vers. IV

A9073407

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073407

DATEC-MOBIL-BOX S, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.
A9073409 DATEC-MOBIL-BOX S, Vers. IV

A9073409

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073409

DATEC-MOBIL-BOX S, Vers. IV
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.
A9074107 DATEC-MOBIL-BOX M, Vers. I

A9074107

DATEC-MOBIL-BOX M, Vers. I Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074107

DATEC-MOBIL-BOX M, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.
A9074109 DATEC-MOBIL-BOX M, Vers. I

A9074109

DATEC-MOBIL-BOX M, Vers. I Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074109

DATEC-MOBIL-BOX M, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.
A9074127 DATEC-MOBIL-BOX M, Vers. I, high

A9074127

DATEC-MOBIL-BOX M, Vers. I, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version top high with closed operating area, recessed by 1.7 mm.

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074127

DATEC-MOBIL-BOX M, Vers. I, high
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x2.32″
IP 65 opt.
A9074129 DATEC-MOBIL-BOX M, Vers. I, high

A9074129

DATEC-MOBIL-BOX M, Vers. I, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074129

DATEC-MOBIL-BOX M, Vers. I, high
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x2.32″
IP 65 opt.
A9074207 DATEC-MOBIL-BOX M, Vers. II

A9074207

DATEC-MOBIL-BOX M, Vers. II Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074207

DATEC-MOBIL-BOX M, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.
A9074209 DATEC-MOBIL-BOX M, Vers. II

A9074209

DATEC-MOBIL-BOX M, Vers. II Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074209

DATEC-MOBIL-BOX M, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.
A9074227 DATEC-MOBIL-BOX M, Vers. II, high

A9074227

DATEC-MOBIL-BOX M, Vers. II, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074227

DATEC-MOBIL-BOX M, Vers. II, high
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x2.32″
IP 65 opt.
A9074229 DATEC-MOBIL-BOX M, Vers. II, high

A9074229

DATEC-MOBIL-BOX M, Vers. II, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074229

DATEC-MOBIL-BOX M, Vers. II, high
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x2.32″
IP 65 opt.
A9074307 DATEC-MOBIL-BOX M, Vers. III

A9074307

DATEC-MOBIL-BOX M, Vers. III Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074307

DATEC-MOBIL-BOX M, Vers. III
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.
A9074309 DATEC-MOBIL-BOX M, Vers. III

A9074309

DATEC-MOBIL-BOX M, Vers. III Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074309

DATEC-MOBIL-BOX M, Vers. III
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.
A9074407 DATEC-MOBIL-BOX M, Vers. IV

A9074407

DATEC-MOBIL-BOX M, Vers. IV Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074407

DATEC-MOBIL-BOX M, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.
A9074409 DATEC-MOBIL-BOX M, Vers. IV

A9074409

DATEC-MOBIL-BOX M, Vers. IV Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9074409

DATEC-MOBIL-BOX M, Vers. IV
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.
A9075107 DATEC-MOBIL-BOX L, Vers. I

A9075107

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9075107

DATEC-MOBIL-BOX L, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
9.92″x4.76″x1.97″
IP 65 opt.
A9075109 DATEC-MOBIL-BOX L, Vers. I

A9075109

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9075109

DATEC-MOBIL-BOX L, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
9.92″x4.76″x1.97″
IP 65 opt.
A9075207 DATEC-MOBIL-BOX L, Vers. II

A9075207

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9075207

DATEC-MOBIL-BOX L, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
9.92″x4.76″x1.97″
IP 65 opt.
A9075209 DATEC-MOBIL-BOX L, Vers. II

A9075209

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9075209

DATEC-MOBIL-BOX L, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
9.92″x4.76″x1.97″
IP 65 opt.
A9076107 DATEC-CONTROL XS, Vers. I

A9076107

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down (battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076107

DATEC-CONTROL XS, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.
A9076109 DATEC-CONTROL XS, Vers. I

A9076109

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076109

DATEC-CONTROL XS, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.56″
IP 65 opt.
A9076157 SET: DATEC-CONTROL XS, Vers. I,station..

A9076157

SET: DATEC-CONTROL XS, Vers. I,station.. Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076157

SET: DATEC-CONTROL XS, Vers. I,station..
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″
IP 65 opt.
A9076159 SET: DATEC-CONTROL XS, Vers. I,station..

A9076159

SET: DATEC-CONTROL XS, Vers. I,station.. Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076159

SET: DATEC-CONTROL XS, Vers. I,station..
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″
IP 65 opt.
A9076207 DATEC-CONTROL XS, Vers. II

A9076207

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076207

DATEC-CONTROL XS, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.
A9076209 DATEC-CONTROL XS, Vers. II

A9076209

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down.(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076209

DATEC-CONTROL XS, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.57″
IP 65 opt.
A9076257 SET: DATEC-CONTROL XS, Vers. II, station.

A9076257

SET: DATEC-CONTROL XS, Vers. II, station. Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076257

SET: DATEC-CONTROL XS, Vers. II, station.
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″
IP 65 opt.
A9076259 SET: DATEC-CONTROL XS, Vers. II, station.

A9076259

SET: DATEC-CONTROL XS, Vers. II, station. Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076259

SET: DATEC-CONTROL XS, Vers. II, station.
product added to your basket
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″
IP 65 opt.
A9077107 DATEC-CONTROL S, Vers. I

A9077107

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077107

DATEC-CONTROL S, Vers. I
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.
A9077109 DATEC-CONTROL S, Vers. I

A9077109

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077109

DATEC-CONTROL S, Vers. I
product added to your basket
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.
A9077157 SET: DATEC-CONTROL S, Vers. I, station..

A9077157

SET: DATEC-CONTROL S, Vers. I, station.. Enclosure-kit: DATEC-CONTROL S, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9077157

SET: DATEC-CONTROL S, Vers. I, station..
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″
IP 65 opt.
A9077159 SET: DATEC-CONTROL S, Vers. I, station..

A9077159

SET: DATEC-CONTROL S, Vers. I, station.. Enclosure-kit: DATEC-CONTROL S, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9077159

SET: DATEC-CONTROL S, Vers. I, station..
product added to your basket
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″
IP 65 opt.
A9077207 DATEC-CONTROL S, Vers. II

A9077207

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077207

DATEC-CONTROL S, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.
A9077209 DATEC-CONTROL S, Vers. II

A9077209

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077209

DATEC-CONTROL S, Vers. II
product added to your basket
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.
A9077257 SET: DATEC-CONTROL S, Vers. II, station..

A9077257

SET: DATEC-CONTROL S, Vers. II, station.. Enclosure-kit: DATEC-CONTROL S, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9077257

SET: DATEC-CONTROL S, Vers. II, station..
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″
IP 65 opt.
A9077259 SET: DATEC-CONTROL S, Vers. II, station..

A9077259

SET: DATEC-CONTROL S, Vers. II, station.. Enclosure-kit: DATEC-CONTROL S, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9077259

SET: DATEC-CONTROL S, Vers. II, station..
product added to your basket
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″
IP 65 opt.
A9093107 DIATEC S

A9093107

DIATEC S Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9093107

DIATEC S
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
8.27″x1.89″x7.87″
IP 40
A9093108 DIATEC S

A9093108

DIATEC S Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9093108

DIATEC S
product added to your basket
ABS (UL 94 HB)
lava
8.27″x1.89″x7.87″
IP 40
A9094107 DIATEC M

A9094107

DIATEC M Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9094107

DIATEC M
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
10.63″x1.89″x7.87″
IP 40
A9094108 DIATEC M

A9094108

DIATEC M Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9094108

DIATEC M
product added to your basket
ABS (UL 94 HB)
lava
10.63″x1.89″x7.87″
IP 40
A9095107 DIATEC L

A9095107

DIATEC L Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated battery compartment for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9095107

DIATEC L
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
12.99″x1.89″x7.87″
IP 40
A9095108 DIATEC L

A9095108

DIATEC L Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated supports for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Close

A9095108

DIATEC L
product added to your basket
ABS (UL 94 HB)
lava
12.99″x1.89″x7.87″
IP 40
A9176128 Battery compartment XS, 2 x AA or 1 x 9V

A9176128

Battery compartment XS, 2 x AA or 1 x 9V

Suitable for DATEC-CONTROL XS. An add-on battery compartment for 2 x 1.5 V mignon-cells (AA) or 1 x 9 V flat battery. It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).

Supply 1 battery compartment

Close

A9176128

Battery compartment XS, 2 x AA or 1 x 9V
product added to your basket
ABS (UL 94 HB)
A9177310 Battery compartment, 1 x 9 V

A9177310

Battery compartment, 1 x 9 V Application: for 1 x 9 V flat battery.

Supply 1 battery compartment, assembly kit

Close

A9177310

Battery compartment, 1 x 9 V
product added to your basket
ABS (UL 94 HB)
A9406332 SHELL-TYPE CASES G 110, Vers. II

A9406332

SHELL-TYPE CASES G 110, Vers. II Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9406332

SHELL-TYPE CASES G 110, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.30″
A9406334 SHELL-TYPE CASES V 110, Vers. II

A9406334

SHELL-TYPE CASES V 110, Vers. II Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9406334

SHELL-TYPE CASES V 110, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.30″
A9406342 SHELL-TYPE CASES G 110, Vers. II

A9406342

SHELL-TYPE CASES G 110, Vers. II Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9406342

SHELL-TYPE CASES G 110, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.77″
A9406344 SHELL-TYPE CASES V 110, Vers. II

A9406344

SHELL-TYPE CASES V 110, Vers. II Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9406344

SHELL-TYPE CASES V 110, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.77″
A9406352 SHELL-TYPE CASES G 110, Vers. II

A9406352

SHELL-TYPE CASES G 110, Vers. II Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9406352

SHELL-TYPE CASES G 110, Vers. II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.32″
A9408335 SHELL-TYPE CASES G 155, Vers. IV

A9408335

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408335

SHELL-TYPE CASES G 155, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″
A9408336 SHELL-TYPE CASES V 155, Vers. IV

A9408336

SHELL-TYPE CASES V 155, Vers. IV Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408336

SHELL-TYPE CASES V 155, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″
A9408345 SHELL-TYPE CASES G 155, Vers. IV

A9408345

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408345

SHELL-TYPE CASES G 155, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″
A9408346 SHELL-TYPE CASES V 155, Vers. IV

A9408346

SHELL-TYPE CASES V 155, Vers. IV Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408346

SHELL-TYPE CASES V 155, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″
A9408355 SHELL-TYPE CASES G 155, Vers. IV

A9408355

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408355

SHELL-TYPE CASES G 155, Vers. IV
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.32″
A9408638 SHELL-TYPE CASES V 155, Vers. V

A9408638

SHELL-TYPE CASES V 155, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408638

SHELL-TYPE CASES V 155, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″
A9408648 SHELL-TYPE CASES V 155, Vers. V

A9408648

SHELL-TYPE CASES V 155, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408648

SHELL-TYPE CASES V 155, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″
A9408737 SHELL-TYPE CASES G 155, Vers. V

A9408737

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408737

SHELL-TYPE CASES G 155, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″
A9408747 SHELL-TYPE CASES G 155, Vers. V

A9408747

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408747

SHELL-TYPE CASES G 155, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″
A9408757 SHELL-TYPE CASES G 155, Vers. V

A9408757

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408757

SHELL-TYPE CASES G 155, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.32″
A9413638 SHELL-TYPE CASES V 190, Vers. V

A9413638

SHELL-TYPE CASES V 190, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413638

SHELL-TYPE CASES V 190, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.77″
A9413648 SHELL-TYPE CASES V 190, Vers. V

A9413648

SHELL-TYPE CASES V 190, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413648

SHELL-TYPE CASES V 190, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x2.68″
A9413737 SHELL-TYPE CASES G 190, Vers. V

A9413737

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413737

SHELL-TYPE CASES G 190, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.77″
A9413747 SHELL-TYPE CASES G 190, Vers. V

A9413747

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413747

SHELL-TYPE CASES G 190, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x2.68″
A9413757 SHELL-TYPE CASES G 190, Vers. V

A9413757

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413757

SHELL-TYPE CASES G 190, Vers. V
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.79″
B7010107 ERGO-CASE M, flat

B7010107

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7010107

ERGO-CASE M, flat
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x3.94″x1.57″
IP 54 opt.
B7010109 ERGO-CASE M, flat

B7010109

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7010109

ERGO-CASE M, flat
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x3.94″x1.57″
IP 54 opt.
B7015107 ERGO-CASE M, high

B7015107

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7015107

ERGO-CASE M, high
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x3.94″x2.17″
IP 54 opt.
B7015109 ERGO-CASE M, high

B7015109

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7015109

ERGO-CASE M, high
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x3.94″x2.17″
IP 54 opt.
B7020107 ERGO-CASE L, flat

B7020107

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7020107

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 54 opt.
B7020109 ERGO-CASE L, flat

B7020109

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Close

B7020109

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 54 opt.
B7020137 ERGO-CASE L, flat

B7020137

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Close

B7020137

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 40
B7020139 ERGO-CASE L, flat

B7020139

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and with display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Close

B7020139

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 40
B7020147 ERGO-CASE L, flat

B7020147

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With top top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Close

B7020147

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 40
B7020149 ERGO-CASE L, flat

B7020149

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Close

B7020149

ERGO-CASE L, flat
product added to your basket
ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 40
  • Technical Data
  • Purchasing Data
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
1 g
Customs tariff number
(OKW product)
85444290
Country of manufacture
Other country